Polycom SoundPoint IP 600 SIP Administrator's Manual page 115

Administrator Guide - SoundPoint
Attribute
reg.x.type
reg.x.auth.userId
reg.x.auth.password
reg.x.server.y.address
reg.x.server.y.port
reg.x.server.y.transport
reg.x.server.y.expires
reg.x.server.y.register
reg.x.server.y.retryTimeOut
reg.x.server.y.retryMaxCount
reg.x.server.y.expires.lineSeize
®
IP
Permitted
Values
private OR
shared
string
string
dotted-decimal
IP address or
host name
0, Null, 1 to
65535
DNSnaptr or
TCPpreferred or
UDPonly
positive integer
0, 1
Null or non-neg-
ative integer
Null or non-neg-
ative integer
positive integer
Copyright © 2004 Polycom, Inc.
Optimizing SoundPoint
Default Interpretation
private If set to private, use standard call
signaling.
If set to shared, augment call sig-
naling with call state subscriptions
and notifications and use access
control for outgoing calls.
Null User ID to be used for authentica-
tion challenges for this registration.
If non-Null, will override the "Reg
User x" parameter entered into the
Authentication submenu off of the
Settings menu on the telephone.
Null Password to be used for authentica-
tion challenges for this registration.
If non-Null, will override the "Reg
Password x" parameter entered into
the Authentication submenu off of
the Settings menu on the telephone.
Null Optional IP address or host name,
port, transport, registration period,
fail-over parameters and lineseize
subscription period of a SIP server
Null
that accepts registrations. Multiple
servers can be listed starting with
y=1, 2, ... for fault tolerance. If
Null
specified, these servers will over-
ride the servers specified in sip.cfg
in 4.6.2.1.2 Server <server/> on
Null page 102.
NOTE:
Null
If the reg.x.server.y.address param-
Null
eter is non-Null, all of the
reg.x.server.y.xxx parameters will
override the parameters specified in
Null
sip.cfg in 4.6.2.1.2 Server <server/
> on page 102
Null
109