Table of Contents
Advertisement
PNA Series Microwave Network Analyzers
E8362A, E8363A, E8364A
Option 0BW, Printed Service Guide
This option adds a printed copy of the assembly-level service guide (this manual).
This option is not available as an upgrade. It can be ordered as part number E8364-90001.
Option 1CP, Rack Mount Flange Kit for Instruments with Handles
Option 1CP is a rack mount kit that contains a pair of flanges (cut to adapt to handles),
rack mount rails, and the necessary hardware to mount the analyzer in an equipment rack
with 482.6 mm (19 inches) horizontal spacing.
Additional kits may be ordered from Agilent. Refer to
on page 6-45
for the part numbers.
Option 1CM, Rack Mount Flange Kit for Instruments without Handles
Option 1CM is a rack mount kit that contains a pair of flanges, rack mount rails, and the
necessary hardware to mount the analyzer in an equipment rack with 482.6 mm
(19 inches) horizontal spacing.
Additional kits may be ordered from Agilent. Refer to
on page 6-45
for the part numbers.
Service Guide E8364-90001
General Product Information
Analyzer Options, Upgrades, and Accessories
"Rack Mount Kits and Handle Kits"
"Rack Mount Kits and Handle Kits"
2- 5
Advertisement
Table of Contents
Troubleshooting
