Option 0Bw, Printed Service Guide; Option 1Cp, Rack Mount Flange Kit For Instruments With Handles; Option 1Cm, Rack Mount Flange Kit For Instruments Without Handles - Agilent Technologies PNA Series Service Manual

PNA Series Microwave Network Analyzers
E8361A

Option 0BW, Printed Service Guide

This option adds a printed copy of the assembly-level service guide (this manual).
This option is not available as an upgrade. It can be ordered as part number E8361-90001.

Option 1CP, Rack Mount Flange Kit for Instruments with Handles

Option 1CP provides a rack mount kit that contains a pair of flanges (cut to adapt to
handles), rack mount rails, and the necessary hardware to mount the analyzer in an
equipment rack with 482.6 mm (19 inches) horizontal spacing.
Additional kits may be ordered from Agilent. Refer to
on page 6-40 for the part numbers.

Option 1CM, Rack Mount Flange Kit for Instruments without Handles

Option 1CM provides a rack mount kit that contains a pair of flanges, rack mount rails,
and the necessary hardware to mount the analyzer in an equipment rack with 482.6 mm
(19 inches) horizontal spacing.
Additional kits may be ordered from Agilent. Refer to
on page 6-40 for the part numbers.
Service Guide E8361-90001
General Product Information
Analyzer Options, Upgrades, and Accessories
"Rack Mount Kits and Handle Kits"
"Rack Mount Kits and Handle Kits"
2- 5