Information In This Chapter - Agilent Technologies E8362A Service Manual

Troubleshooting

Information in This Chapter

Information in This Chapter
The information in this chapter helps you:
• Identify the portion of the analyzer at fault.
• Locate the troubleshooting procedure to allow you to identify the specific assembly or
peripheral at fault.
The sections in this chapter are arranged in a logical troubleshooting order. The following
table lists the sections and a brief summary of what to look for in that section.
Chapter Four at-a-Glance
Section Title
Getting Started with
Troubleshooting
Power Up Troubleshooting
Front Panel Troubleshooting
Rear Panel Troubleshooting
Measurement System
Troubleshooting
Instrument Block Diagrams
4-2
Summary of Content
A starting point to begin troubleshooting.
Power-up problems:
• Power supply problems
• LCD problems
• Bootup for the network analyzer interface
Problems occurring after the network
analyzer interface is loaded:
• Does the display color appear correct?
• Do the front panel keys function
properly?
• Does the front panel USB connector
function properly?
Problems associated with the rear panel
interconnects.
The data found at these rear panel
interconnects can be used to troubleshoot the
CPU board.
Problems with the measurement portion of
the analyzer.
• Checking the A, B, R1, and R2 signals.
• Checking the source group.
• Checking the receiver group.
• Checking the signal separation group.
Block diagrams for the analyzer including
Option UNL and Option 014.
PNA Series Microwave Network Analyzers
E8362A, E8363A, E8364A
Start Page
Page 4-4
Page 4-6
Page 4-17
Page 4-21
Page 4-27
Page 4-53
Service Guide E8364-90001