Repair and Replacement Procedures
Information in This Chapter
Information in This Chapter
This chapter contains procedures for removing and replacing the major assemblies of your
Agilent Technologies PNA series microwave network analyzer.
Chapter Seven at-a-Glance
Section Title
Before Starting the Removal
and Replacement Procedures
Removal and Replacement
Procedures
Post-Repair Procedures
7-2
Summary of Content
Warnings and cautions pertaining to personal
safety and ESD protection.
The proper assembly replacement sequence
for your analyzer.
A table of removal and replacement
procedures and the corresponding page
numbers where they are located.
The actual procedures for removing and
replacing the major assemblies in your
analyzer.
The procedures occur in numerical order of
assembly reference designator.
A table for the proper tests, verifications, and
adjustments to perform on your analyzer after
repair.
PNA Series Microwave Network Analyzers
E8362A, E8363A, E8364A
Start Page
Page 7-3
Page 7-4
See
on page 7-4
for specific
procedures.
Page 7-70
Service Guide E8364-90001
Table 7-1