Agilent Technologies E8362A Service Manual page 227

PNA Series Microwave Network Analyzers
E8362A, E8363A, E8364A
Replacement Procedure
NOTE When replacing the assemblies, ensure that the ribbon cables are not under
the assemblies.
1. Reverse the order of the removal procedure.
2. Perform the post-repair adjustments, verifications, and performance tests that pertain
to this removal procedure. Refer to
Figure 7-4 Front Panel Subassemblies Removal
Service Guide E8364-90001
Removing and Replacing Front Panel Subassemblies
Table 7-2 on page 7-70.
Repair and Replacement Procedures
7- 13