Replaceable Parts Listings - Agilent Technologies E8362A Service Manual

Replaceable Parts

Replaceable Parts Listings

Replaceable Parts Listings
This section contains the replacement part numbers and their descriptions for your
Agilent PNA series microwave network analyzer. You can find the locations of replaceable
parts in this section:
• listed by reference designator in
• listed by the type of part in
Table 6-1 Location by Reference Designator
Reference
Description
Designator
A1 Keypad assembly
A2 Display assembly
A3 Front panel interface board
A4 Power supply assembly
Signal processing ADC module (SPAM)
A6
board
A8 Fractional-N synthesizer board
A10 Frequency reference board
A11 Phase lock board
A12 Source 20
A14 System motherboard
A15 CPU board
A16 Test set motherboard
Local oscillator multiplier/amplifier 10
A17
(LOMA 10)
A18 Multiplier/Amplifier (MA 20)
A19 Splitter
Local oscillator distribution assembly
A20
(LODA)
Source multiplier/amplifier 50 (SOMA 50)
A21
(E8363A, E8364A only)
A22 Switch splitter
Channel R1 30-dB attenuator(E8362A only)
Channel R2 30-dB attenuator(E8362A only)
A23 Channel R1 detector (E8363A, E8364A only)
A24 Channel R2 detector (E8363A, E8364A only)
6-6
Table 6-1, or
Table 6-2.
PNA Series Microwave Network Analyzers
E8362A, E8363A, E8364A
Location
"Front Panel Assembly" on page 6-10
"Top Assemblies and Hardware" on
page 6-12
"Bottom Assemblies, Standard" on
page 6-14
Service Guide E8364-90001