Network Setting; Dhcp Setting - EverFocus EFC304 User Manual

Remote Alarm
NN
Unknown Card
NN
Expired Card
NN
Inavid Card
NN
Invalid Door
NN
Invalid Time
NN
APB Failed
NN
Card PIN Failed
NN
Door Forced Open
NN
Door Held Open
NN
Reader Lost
NN
Panic Open
NN

5.10 Network Setting

Correct network settings are needed for NAV Controller to get online and be accessible remotely.
Network setting includes DHCP setting, IP address setting.
Press five times from main menu items to view the below screen:
In the above screen, press

5.10.1 DHCP Setting

DHCP setting is the first submenu under network setting. Press
DHCP setting.
The below screen will be shown in the DHCP setting submenu. Press
(DHCP enabled) and static IP (DHCP disabled). The default DHCP setting is disabled by default.
Network Setting
to enter the network setting submenus.
DHCP Setting
DHCP Enabled
[ENT] to toggle
57
NAV IP Access Controller
Remote Alarm
NNNNNNN
Unknown Card
NNNNNNN
Expired Card
NNNNNNN
Invalid Card
NNNNNNN
Invalid Door
NNNNNNN
Invalid Time
NNNNNNN
APB Failed
NNNNNNN
Card PIN Failed
NNNNNNN
Door Forced Open
NNNNNNN
Door Held Open
NNNNNNN
Reader Lost
NNNNNNN
Panic Open
NNNNNNN
from the below screen to configure
key to toggle between DHCP