Input the start and end time, select the entry/exit mode for current time section, and click
the "Apply" and "Save" button. Click "Return" back to group schedule setting page.
After back to the page, click "Save" button, group schedule have been saved, shown as
following:
After the current date type is set, the user want to be set the other date as same, just need
to click the "copy" button to copy the pervious setting in the "Operation" column of the
first one, and then click the "paste" button for the second one, the setting will be applied to
the second one.
13.5.4 Save As a New Schedule
A group schedule can be edited and it can be saved as a new schedule. This feature is used
to add a similar setting for other group schedules.
Steps:
1) Edit the schedule name on the box or not.
2) Click "Save as" to create a new schedule.
Figure13-15 Data Updating
118
NAV IP Access Controller