Set Arm Pin; Set Language; Backlight Setting - EverFocus EFC304 User Manual

Enter a new system PIN. Enter it a second time to confirm. Press
Pressing at any time will exit the menu without changing the system PIN.

5.5.7 Set Arm PIN

Arm PIN must be entered before the controller can be armed or disarmed via controller keypad. The
factory default arm PIN is 00000000.
Press at the window below to set arm PIN.
The LCD will display the following menu.
Enter a new arm PIN. Enter it a second time to confirm. Press
at any time will exit the menu without changing the arm PIN.

5.5.8 Set Language

Press at the below window to adjust the language setting:
Press to toggle among Chinese, English and Russian, Press
the one shown on window when exiting.

5.5.9 Backlight Setting

Press at the below window to change the backlight setting
Press to toggle between enabling and disabling backlight. Press
Input SYS Password
________
Set ARM Password
Input ARM Password
________
Set Language
简体中文
按［ENT］切换
Backlight Setting
Backlight: ON
[ENT] to toggle
to set the new arm PIN. Pressing
to exit. The selected language is
English
[ENT] to toggle
Backlight: OFF
[ENT] to toggle
33
NAV IP Access Controller
to set the new system PIN.
to exit