Table of Contents
Advertisement
2. Installation
The Installation has three procedures described as below. Each procedure will be
introduced in the following sections in detail.
Step 1: Installation Preparation
• Obtain a floor plan
• Determine the hardware and location
• Determine the number of controllers according to
system structure
Step 3: Software Setup / Configuration
• Log in controller built-in software through IE on computer
• Set user account for user software
• Set controller and other equipment
• Set holidays, shifts and door control rules
• Log in card and set card attributes
2.1 Installation Preparation
Before installation, users are advised to collect information properly which will make the
installation more smoothly and helps to reduce time and energy cost. For professional
constructors, the information below will be of great use.
Step 2: Hardware Installation
• Installing the controller
• Connecting to the door lock / open button / sensor / bell
• Connecting to the alarm input / output
• Connecting to the card reader
• Connecting to the computer through the network. Mount a
backup battery in the enclosure
11
NAV IP Access Controller
Chapter
2
Advertisement
Table of Contents
