12. Controller
This chapter describes how to set up controller. In this chapter you will learn:
How to configure the controller settings.
How to download data to the controller.
12.1 Controller Setting
You can configure the controller settings through this page. Click "Access Control" →
"Controller" → "Controller setting" from the menu bar to enter the controller settings page,
shown as below:
To configure the controller settings, select the controller on the list and then click the
"Setting" button, and the setting page appears.
You can configure the Door, Reader, Alarm Input, Alarm Action, Alarm Time, APB Area and
Other settings on this page.
12.1.1 Door
Click the "Door" tab, the setting page appears as below:
Figure12-1Controller Setting
Figure12-2Controller Setting
101
NAV IP Access Controller
Chapter
12