2) Click on one cell in the column "Day setting", a pop-up box appears. You can set
the time sections and entry/exit mode, shown as Figure13-14.
3) After completed, click the "Save" button and the new group schedule have been
created.
13.5.2 Delete a Group Schedule
Steps:
1) In the group schedule setting page, select one or more schedule to be deleted.
2) Click the "Delete" button.
3) Confirm to delete.
4) Click the "Ok" button.
13.5.3 Edit a Group Schedule
Select a group schedule and click the "Edit" button to enter the group schedule setting
page, shown as following:
The default entry/exit mode is "Card only", if need to set the mode in different time
sections, click the time bar, enter to the "Modify Schedule" page, shown as following:
Figure13-13 Edit a Group Schedule
Figure13-14 Modify a Schedule
117
NAV IP Access Controller