Table of Contents
Advertisement
10. Real-Time Monitoring
10.1 Real-Time Event
Click on system menu bar "System" "Real-time Monitoring" "Real-time Event", to
enter the Real-time events page; see figure below:
As shown in the above figure, the real-time monitoring page is divided into three areas:
Control Panel: The Map list and device list located on the left side Control Panel, which
contains the map list, controllers and doors, arm zones, DVR, CAM and View. Users can
remotely control open/close, set alarm etc.
Electronic Map: Electronic map is located on the center page.
Real-time Event: The real-time event records are located at the bottom page. It
automatically receives the event information of the controller and scrolls the event
information to display in real time. In case of accessing the page for the first time, the
events of the controller are sequentially listed according to the sequence of being received.
When receiving a new event, it automatically lists the latest event in the first line.
! Note: substation only caches some real-time event records. When the user enters
the real-time event record page at the first time, it only displays some real-time event
record of the station. For previous events, users need to go to card access inquiry page to
search events.
Figure10-1Real-time Event
92
NAV IP Access Controller
Chapter
10
Advertisement
Table of Contents
