Basic Setting; Change Password - EverFocus EFC304 User Manual

NAV IP Access Controller
Chapter
8

8. Basic Setting

This chapter will introduce the Basic Setting of the EverAccess® NAV controller in detail,
which includes changing passwords, User Group, User Setting, Local Server, system upgrade
and central server configuration.
Change password: Change login password.
User Group: Add, delete and change the User Groups in the software. The quality of the
User Groups has no limit and the user can add the User Group(s) as required.
User Setting: Add, delete and change the user who can log in to and use the software. By
default, the software generates admin as a super user who has all the operation authorities
of the software. The user can only change the password of the super user.
Local Server: Set the IP type, address, gateway, date, time, etc. of NAV controller.
System upgrade: Support online upgrade and local upgrade.
Central server configuration: Configure the system settings.

8.1 Change Password

The changed password is the login password by which the user logs in to the embedded
software of NAV Controller through the browser and only the current login password can
be changed.
First, input the old password, then input the new password and input the new password
again and then click the "Save" button. The contents of the new password and repeat
password must be the same. If the input content has an error, click the "Reset" button to
fill it in again.
Figure 8-1 Change Password
75