Remote Operation; Edit The Electrical Map - EverFocus EFC304 User Manual

NAV IP Access Controller

10.1.1 Remote Operation

Left-click a controller node in the Device List and its corresponding function menu pops up.
You can remotely operate the functions from the menu, such as arm, disarm, reset alarm
and add map etc. Left-click a door node in the Device List and its corresponding function
menu pops up. You can remotely operate the functions from the menu, such as "Open
Door" and "Close Door".

10.2 Edit the Electrical Map

Click on the menu bar "System"  "Real-time Monitoring"  "Electronic Map" to enter
the Electronic Map edit page:
Figure10-2Edit Electronic Map
93