EverFocus EFC304 User Manual page 47

Nav ip access controller
Hide thumbs Also See for EFC304:
Table of Contents

Advertisement

next time the card can only be allowed to exit that door. If cardholder attempts to access the same door
again without first swipe the card to exit the door, access is denied and the door will not open.
At the following submenu, press
The APB status of the current card is enabled or disabled, will be displayed as shown below. Press
to toggle between two statuses. Press
Note: Anti-Passback (APB) is an access control function whereby a cardholder is prevented from "passing
back" his card to another person to gain entry into the same area twice, without leaving. Facilities are
typically fitted with both Entry and Exit readers when Anti-Passback is implemented. A cardholder must
alternate usage between entry and exit readers. If the cardholder attempts to pass through an entry
reader twice consecutively, his access will be denied and the system will generate an illegal event when
the cardholder's card is configured as APB enabled. Be careful to enable this function in the system with
only single side readers installed somewhere.
5.6.4.10
Card PIN Setting
Each card in the NAV Controller is associated with an 8-digit PIN. The PIN status can be set as enabled or
disabled and if enabled, A cardholder is required to input the PIN every time when enters/exit the door if
the reader is a keypad reader.
At the following submenu, press
The PIN status of the current card, i.e., enabled or disabled, will be displayed as shown below. Press
to toggle between two statuses. Press
5.6.4.11
Change Card Serial Number
Each card in the NAV Controller has a unique serial number, it can be modify. Usually if the cardholder
lost the card and doesn't want to add a new one again, it can be modified from the old serial number to
the new one.
At the following submenu, press
The below screen will be shown to prompt users to input new ID.
to enter Anti Passback setting:
APB Setting
to exit.
APB enabled
[ENT] to toggle
to enter PIN setting:
PIN Setting
PIN enabled
[ENT] to Toggle
to change card ID:
Modify ID
APB diabled
[ENT] to toggle
to exit.
PIN disabled
[ENT] to Toggle
39
NAV IP Access Controller

Advertisement

Table of Contents
loading

This manual is also suitable for:

Efc302Efc308Efc306

Table of Contents