EverFocus EFC304 User Manual page 74

The default control group is "Full Granted" and the default password is "000000." First,
select a format of the card to be added.
7.1.2.1 Rapid Card Addition
When a user logs in to the software and swipes a card on the controller, the card swiping
record will be displayed in the system event records and can be copied (for details, please
refer to 7.3.5.1).
Steps：
1) Swipe the card to be added to the card reader connected with the controller in which
the card is added.
2) Log in to the Web UI, the card swiping record will appear in the system event records
(entry/exit card swiping records or illegal card swiping records). Copy the card number.
3) Select the correct card format.
4) Add one new card in the card page, paste the card number in and click the "Save"
button to finish addition.
7.1.2.2 Card Setting Interface
Click on the menu bar "Access Control"  "Card"  "Card Setting", enter to cards setting.
Below is how to add a card and the allocation of access groups (for details, please refer to
14.2.1).
Steps
：
1) Click the "Add" button to enter the card adding page.
2) Fill in card attributes.
3) If the Cardholder member is already in the system, allocate the card to one employee.
4) Select the access group to which the card belongs in the pull-down menu of the
"Access Group."
5) Or click the "Private Schedule" to allocate a special control scheme for the card. When
the card has a "Private Schedule" applied, the design is used for authentication in case
of door entry/exit and it has the highest control priority.
6) Click the "Save" button to finish addition.
7.1.2.3 Import Cards Using Excel File
In Excel, edit the card data (no quantitative restrictions), save as CSV file to import the card
through software features to complete the registration card to the controller (whether
registered to the controller of this card depends on the access group setting, if there is no
choice access group options, they are given the default access group "Full Granted").
Click on the menu bar "Access Control"  "Card""Import Cards"
Steps：
66
NAV IP Access Controller