Table of Contents
Advertisement
NAV IP Access Controller
8.3 User Group
In the User Group page, the current User Group list in the system is displayed on the left
side. The user who has the authority of User Group can carry out User Group creation,
change and deletion operations in this page.
Figure 8-2 User Groups
8.3.1 Add a Group
Click the "New" button on the upper side of the page, input the name of the new User
Group in the box of "Name of User Group," tick off the detailed operation authorities of the
User Group, edit and click the "Save" button to finish the operations.
8.3.2 Edit a Group
Select the name of the User Group to be changed in the left-side User Group list, change
the name and detailed operation authorities of the User Group, edit and click the "Save"
button to finish the operation.
8.3.3 Delete a Group
Select the name of the User Group to be deleted in the left-side User Group list, click the
"Delete" button, then the confirmation dialog box "Confirm Delete?" pops up. If it is
confirmed to delete the User Group, click the "OK" button, then the system displays a
dialog box reading, "Deleted Successfully."
NOTE: The User Group which is being used by the user cannot be deleted.
Figure 8-3 Confirm to Delete a Group
78
Advertisement
Table of Contents
