Other Setting - EverFocus EFC304 User Manual

Steps:
1) Click the "APB area" tab.
2) Select an area to be set.
3) Input area information.
4) Click the "Save" button and save the changes.

12.1.7 Other Setting

You can configure the overall settings on the page. Click the "Other" tab and the page
below appears:
•
Card Switch: check/uncheck to enable/disable the first-card-in function.
the door using the first card, the status of the door is normal or normally opened.
•
Time server: indicates whether the controller is the time synchronization server in the
system. All controllers in the system will automatically adjust its date and time setting
to match that of the time synchronization server. There can be only one time
synchronization server in the system and the last assigned time synchronization server
will replace any previous setting. If the controller is connected to a PC installed with
Flex software, the software will automatically modify the controller date and time to
match the PC setting. If the controller date and time are found to be incorrect, check
the date and time on the control PC.
•
Date format: the system offers two date format: "YYYY-MM-DD" and "MM-DD-YYYY"
and users can choose the desired format.
•
Daylight saving time: check/uncheck to enable/disable the auto Daylight Saving Time
function. When auto DST is enabled, user need to define the start and end dates of DST,
including month, week, date, and time, forward or backward. When auto DST is
enabled, the controller will automatically adjust DST one hour forward from 1:59:59am
to 3:00:00am on the first Sunday in April, and adjust it backward one hour from
1:59:59am to 1:00:00am on the last Sunday in October.
Steps:
1) Click the "Other" tab.
2) Select and change the setting.
3) Click the "Save" button to save the changes.
Figure12-8Other Setting
109
NAV IP Access Controller
After opening