Edit A Door Schedule - EverFocus EFC304 User Manual

NAV IP Access Controller

13.3.3 Edit a Door Schedule

Select a door schedule and click the "Edit" button to enter the door schedule setting page:
Figure13-6 Edit a Door Schedule
The default entry/exit mode is "Card only", if you need to set the mode in different time
sections, click the time bar to enter the "Modify Schedule" page, shown as following:
Figure13-7 Modify Schedule
Input the start and end time, select the entry/exit mode for current time section, set the
lock level for the door if using the multi-card access, and click the "Apply" and "Save"
button. Click "Return" back to group schedule setting page.
After back to the page, click "Save", the door schedule have been saved, shown as below:
Figure13-8Data Updating
After the current date type is set, the user want to be set the other date as same, just need
to click the "copy" button to copy the pervious setting in the "Operation" column of the
first one, and then click the "paste" button for the second one, the setting will be applied to
the second one.
114