Set Card Properties - EverFocus EFC304 User Manual

Press to enter to the submenu for the following two methods of deleting cards.
5.6.4.5 Delete a Card
The controller can delete a card according to its serial number, which is printed on the face of each card.
At the following window:
Press and the system will prompt the user to enter a card serial number, as shown below:
After entering the serial number, press
confirm again like the below screen:
Press to confirm or press
5.6.4.6 Delete All Cards
All cards can be deleted at once. At the following window:
Press and system will prompt the user to confirm deletion:
Press again to delete all cards.
Caution
: this operation will permanently delete ALL cards from the controller database. This
operation is NOT undoable.

5.6.4 Set Card Properties

Under the Card Setting menu, press
Delete Cards
Delete a Card
Input Card Serial
card#:___________
to delete this card. The system will prompt users to
Are you sure to
Delete000005398787
to exit from the "delete card" menu.
Delete All Cards
Are You Sure ?
[ENT] to Confirm
twice to bring up the following window:
Set Card
Properties
37
NAV IP Access Controller