EverFocus EFC304 User Manual page 61

Nav ip access controller
Hide thumbs Also See for EFC304:
Table of Contents

Advertisement

ARM PIN Fail
User is required to enter PIN when pressing ARM key to arm or disarm the system. An ARM PIN Fail
event will be generated when a wrong PIN is entered three times consecutively. Please refer to the
section "ARM/DISARM". The time setting for ARM PIN failure event is shown in the below figure:
Press numeric keys to input the specified alarm time for event of ARM PIN failure Press
and press
to discard the change just made.
Remote Alarm
System administrator can directly generate alarm signal using the Control Software when he observes
abnormal condition through surveillance system such as CCTV. This is defined as a Remote Alarm event.
The time setting for remote alarm event is shown in the below figure:
Press numeric keys to input the specified alarm time for event of remote alarm. Press
and press
to discard the change just made.
Unknown Card
Unknown card refers to a card that hasn't been registered in the system. An Unknown Card event will be
generated when an unknown card is swiped on the reader. The time setting for unknown card event is
shown in the below figure:
Press numeric keys to input the specified alarm time for event of unknown card. Press
and press
to discard the change just made.
Expired Card
Any card in the system is usually assigned a valid date. After the valid date has passed, the controller will
automatically set the card as an expired card. An expired card cannot gain access to the system. At the
same time, an Expired Card event will be generated when an expired card is swiped on the reader. The
time setting for expired card event is shown in the below figure:
Press numeric keys to input the specified alarm time for event of expired card. Press
and press
to discard the change just made.
Invalid Card
To disable a card, user can directly set the card as invalid card. An invalid card cannot gain access to the
system. At the same time, an Invalid Card event will be generated when an invalid card is swiped on the
reader. The time setting for invalid card event is shown in the below figure:
ARM Password Fail
000Min 10Sec
Remote Alarm
000Min 10Sec
Unknown Card
000Min 10Sec
Expired Card
000Min 10Sec
Invalid Card
000Min 10Sec
53
NAV IP Access Controller
to confirm
to confirm
to confirm
to confirm

Advertisement

Table of Contents
loading

This manual is also suitable for:

Efc302Efc308Efc306

Table of Contents