Login - EverFocus EFC304 User Manual

7.2 Login

Open browser and input the IP address of the controller in the address bar. If the user does
not carry out any settings for the IP address, the default IP address of the controller will be
192.168.1.200. Following the prompts on the page, input login name, password and
identifying code and Click the "Log on" button to login. See Figure 7-4:
You can select
the language of the operation page at the upper right corner of the page. The default
login setting shown as following:
User Name: admin
Password: admin
Note: admin is a special "super administrator" which is mainly used for system
installation and restoration. The "super administrator" has all authority for operating the
software and is unchangeable. The user itself can not be deleted and only the password can
be changed. Please change and remember well the password after the first login to ensure
the security of the software.
The password of the super administrator is carried out through "System"  "Basic Setting"
 "Change Password." The super administrator can create users and change the authority
of the user through "Basic Setting"  "User Group"  "Add." If all other users are deleted
and the password of the super administrator is lost, then the software cannot be accessed.
After inputting a username and password in the login page, select whether "login with the
identity of central server user," and then click the "Login" button to enter the browser page
of the controller.
Figure 7-6Login Page
70
NAV IP Access Controller