Edit A (Batch) Card; Delete A (Batch) Card - EverFocus EFC304 User Manual

•
The card can be added to the controller by the system reader in the controller's
menu.
If the added cards' quantity is more one which number is continual, input the starting
number and quantities to batch add.

14.1.2 Edit a (Batch) Card

Edit a Card: In the card setting page, click the card which needs to be edited and a pop-up
window appears, shown as following:
Modify the relevant properties of the card, select and click the "Save" button, when the
progress bar becomes 100%, click the "Back" button to close the window.
Edit batch Card: Press the Shift key to select more than one cards, click the "Edit" button
and pop-up a window to modify the relevant attributes. Click the "Save" button after edit.
Click the "Back" button to close the window.

14.1.3 Delete a (Batch) Card

Steps:
1) In the card setting page, select the cards which need to be deleted.
2) Click the "Delete" button.
3) Confirm to delete.
4) Click "OK" to finish.
Figure14-3Edit a Card
121
NAV IP Access Controller