Table of Contents
Advertisement
NAV Series TCP/IP Standalone Network Access Controller
address: 192.168.1.200.
4.7.9 Reset Network Setting
Scroll to the "Reset Network Setting" item and press the function key "#" or numerical keys
"5" or "6" to enter the setting menu.
Press "#" to confirm "Reset Network Setting", and press "*" to exit.
4.8 System Info
In the main menu of the System Setting, scroll to the "System Info" menu item and press "#"
to enter the System Info display interface. Display the hardware version of the current
controller, amount of stored user cards and total amount of recorded events.
4.9
Introduction of System Operation
4.9.1 Door Open by Swiping Card
2012-01-04 09 :25
0009251826
Access granted
Welcome to EverFocus
If the swiped card has the corresponding user name, after successful authentication, the
user name information of the card holder and "Auth Successful" will be displayed. If the
user name information is not set, the card number of the swiped card will be displayed. If
the card is not available in the system or the card has no door open function, "Auth Fails"
will be displayed.
4.9.2 Door Open with Single
In the main interface, press any numerical key and the password input interface will show
up.
Are you sure?
Ver:
1.0.0-001
MAC: _ _:08:43:22
Cards:
00100
Events:
0003098
2012-01-04
MON 09:25
Access denied
Welcome to EverFocus
Password
36
Advertisement
Table of Contents
