Table of Contents
Advertisement
5.6 Card Setting
Card setting can be configured using either the controller or the built-in management software. Using
the built-in management software is the easiest way to enroll cards. However, enrolling at the controller
can be useful if the controller is offline. The process is described below.
5.6.1 Enter Card Setting Menu
Under the System Menu, press
Press
to enter to the Card Setting menu. Use
options. All menu options under the Card Setting menu are introduced below:
5.6.2 Add Cards
When a new card is added, the controller will automatically assign an index number in the order of
enrollment. The index number here is not related to the card number in the software. Users do not need
to take care of this number.
Under the Card Setting menu, press
Press
and enter a serial number on the card, as shown below:
User input card serial number, or swipe card via system reader, system reader will automatically read
the card serial number to the controller.
Press
to confirm and the system will add the card to the controller database. The user can also
present the card at the system reader at this time, which will automatically acquire the index number of
the new card, show the card number and add it to the controller. It will show "card exists already" if the
same card number is in the database already.
5.6.3 Delete Cards
The user can directly delete an individual card with a specific index or card number from the controller,
or delete all cards at once. Under the Card Setting menu, press
window:
once to bring up the following window:
Card Setting
at the window below to add a card:
Add Cards
Input Card Serial
card#:___________
Input Card Serial
card#:000005398787
36
NAV IP Access Controller
and
to choose from different menu
once to bring up the following
Advertisement
Table of Contents
