Set Card Properties - EverFocus EFC301 User Manual

NAV Series TCP/IP Standalone Network Access Controller
4.5.2.2 Delete All Cards
In the "Delete Card" submenu, scroll to the "Delete All Cards" menu item and press "#" to
enter the "Delete All Cards" interface. The system will request the user to reconfirm
whether to delete all cards. Press "#" to delete all cards.
Caution: This operation will delete all card information from the controller.

4.5.3 Set Card Properties

In the "Card Setting" menu, scroll to "Set Card Properties" menu item and press "#" to
enter the "Set Card Properties" interface. The system will prompt the user to input the card
number. If the card does not exist in the system, the system will prompt "Unknown Card."
After inputting the card number, press "#" to enter the card attribute setup menu. Each
card has seven attributes that can be changed. Scroll to select the menu item to be set. And
Are you sure to
delete Card?
000009251887
Cancel
Deleted Card
successfully
Are you sure to
delete all Card?
Cancel OK
Add Card
Delete Card
Set Card Properties
Please card or input
card ID..
000009251887
OK
Unknown Card
Device is oper
–ating OK
Please card or input
card ID..
_ _ _ _ _ _ _ _ _ _ _
Unknown Card
26