controller. The default password of the system is 00000000. For security purposes, it is
suggested that the user changes the password before using the controller and properly
secure the password. Once the password is lost, the system administration password has to
be reset after general reset, meanwhile, the data in the system will be deleted.
In the "System Setting" menu, scroll to the "Set SYS Password" menu and press "#" to enter
the "Set SYS Password" interface.
After inputting a new system administration password, press "#"twice to confirm. The
system will display whether the new password takes effect. If the two passwords entered
are different, the system will prompt to reset.
Pressing "*" before pressing "#" for confirmation, the new password will not take effect and
the system will return to the previous menu.
4.4.7 Set ARM Password
Before protection setup and withdrawal of the controller, the alarm administration
password must be input through the keyboard. The default alarm administration password
is 00000000.
In the "System Setting" menu, scroll to "Set ARM Password" menu item and press "#" to
enter the "Set ARM Password" interface.
Set Date
Set Time
Auto Daylight
Set SYS Password
Input SYS PIN
_ _ _ _ _ _
Cancel
OK
Setting updated
successfully
Set Time
Auto Daylight
Set SYS Password
Set ARM Password
NAV Series TCP/IP Standalone Network Access Controller
Repeat:
_ _ _ _ _ _
Cancel
OK
Passwords mismatch
Please retry
21