Table of Contents
Advertisement
NAV Series TCP/IP Standalone Network Access Controller
13.1.2 Edit/Change Card
In the card setting page, select the column in which the card to be changed is located, click
the "Edit" button and then the card changing dialog box pops up; see the figure below:
Figure 13-5 Edit card
Change the related attribute of the card, click the "Save" button and click the "Return"
button after the progress bar reaches 100%. Then the dialog box disappears.
Figure 13-6 Change card
13.1.3 Change Cards in Batch
Press "Shift" on the keyboard while selecting multiple cards, click the "Edit" button, change
the related attributes in the pop‐up dialog box, click the "Save" button and click the "Return"
button after the progress bar reaches 100%. Then the dialog box disappears.
13.1.4 Delete Card
Operation Procedures:
1) In the card setting page, check the card to be deleted;
2) Click the "Delete" button;
3) The confirmation box "Confirm delete?" pops up;
4) Click "OK," then the selected control group is deleted.
86
Advertisement
Table of Contents
