NAV Series TCP/IP Standalone Network Access Controller
Figure 12-10 Update data
After the setting of a certain date is finished, the setting of another date is the same. Select
the set date in the control group scheme setting page, click the "Copy" button to copy the
set date rules, click to select the date on which the rules are applied and click the "Paste"
button in its operation bar, then the rules copy is finished.
12.3.4 Save as New Scheme
The control group scheme can be changed and saved as an original scheme or saved as new
scheme. This function helps the user to rapidly add some control group schemes with
similar scheme contents.
Operation Procedures:
1) Input the name of a new design in the textbox after "Design Name."
2) Click the "Save as" button in the control group scheme change page, then a new
scheme is generated.
12.4 Access Group
Click the "Access Control" "Access Rule," select "Access Group" to enter the control group
setting page; see the figure below:
Figure 12-11 Access group
12.4.1 Add Access Group
In the "Control Group Setting" page, click the "Add" button, then the control group addition
interface pops up.
82