Table of Contents
Advertisement
NAV Series TCP/IP Standalone Network Access Controller
date rules, click to select the date on which the rules are applied, and click the "Paste"
button in the operation bar, then the rules copy is finished.
12.3 Group Schedule
Click "Access Control" "Access Rule," select "Group Schedule" to enter the control group
scheme setting page; see the figure below:
12.3.1 Add Group Schedule
In the control group scheme setting page, click the "Add" button to enter the scheme
setting page.
Operation Procedures:
1) Input the name of a new design in the textbox of "Design Name."
2) Click the time period of "Date Setting," a dialog box will pop up, in which the time
period and the door entry/exit authentication authority can be set; see Figure 12‐9.
3) After setting the authentication mode of various date types, click the "Save" button,
then the new design is added into the control group scheme list.
12.3.2 Delete Group Schedule
Operation Procedures:
Figure 12-6 Group schedule
Figure 12-7 Add control group scheme
80
Advertisement
Table of Contents
