Delete Date; Door Schedule - EverFocus EFC301 User Manual

NAV Series TCP/IP Standalone Network Access Controller
three cycling types are as follows:
1) One‐time Holiday
One‐time holiday refers to a holiday only occurs once and will not occur in the future
years, for example, an unfixed holiday.
2) Month Holiday
Month holiday refers to the holiday which occurs on a certain day in a certain month
every year. For example: New Year's day, Jan 1 every year.
3) Week Holiday
Week holiday is another periodic holiday and refers to a certain day in a certain week of
a certain month. This holiday is common in western countries. For example,
Thanksgiving Day is the fourth Thursday of December every year. The
change the week holiday every year.
！ Note: These holidays should be allocated during system initialization and re‐checked at the
beginning of every year.
Operation Procedures:
1) Select date cycling type.
2) Select date in the calendar.
3) Select date type.
4) Input remarks (optional).
5) Click the "Save" button to add a new date in the list.

12.1.2 Delete Date

Operation Procedures:
1) Check the date(s) (one, part or all) to be deleted in the date list.
2) Click "Delete," then the prompt dialog box "Confirm delete?" pops up.
3) Click "OK," then the selected control date is deleted.
！Note: After addition or deletion of a date, the system will automatically "Save" the
changed information.

12.2 Door Schedule

Click "Access Control"  "Control Management," select "Door Schedule" to enter the door
region scheme setting page; see the figure below:
78
user need not