4 Operation Instructions of Hardware
EFC301 integrates the card reader function, keystroke operation function, LCD display
function and control function. This chapter mainly introduces the functions of the system
and the relevant operating procedures. The simple settings of the controller can be
conducted through the keyboard and LCD display, and the operations of other complex
functions need to be controlled through the WEB browser. For details, please refer to the
description in the software chapter.
4.1
Operation Instructions of Keystrokes
The 3×4 keyboard on the main card reader is shown in the figure above.
Main Interface
#: System function key
*: Protection setup/withdrawal key
Enter System Menu
#: OK
*: Cancel
"2"、"8": Up and down movement
"4": Enter previous menu. If no previous menu is available, return to main interface
"6": Enter next menu
"5": Select
4.2 Operation of Home Page
After the system is installed, the LCD screen of the controller will display the date, day of
the week and time. This page is called the Home Page and various operations of the
controller will be correspondingly displayed here. After entering the system menu, each
time "*" key is pressed, it will return to the previous menu. In addition, not performing any
operation for 1 min or continuously pressed "*", will make the system automatically return
to the Home Page.
NAV Series TCP/IP Standalone Network Access Controller
1
2
3
4
5
6
7
8
9
*
0
#
15
Chapter
4