Cpu Leds Behavior - Motorola ACE3600 RTU Owner's Manual

CPU LEDs Behavior

The table below describes the behavior of the LEDs on the CPU module.
Table 4-4 ACE3600 CPU LEDs Behavior
LED Name
PWR
ERR
RST
APPL
CONF
*
H1 LNK1
*
The LED names I1 ACTV, I1 L/RX, H1 LNK1/LNK2, and D1 RX appear only in CPU 3680.
Description
Power LED
Bicolor LED (Red, Green)
Error Logger Status LED
Bicolor LED (Red, Green)
Reset LED
Bicolor LED (Red, Green)
Application LED
Bicolor LED (Red, Green)
Configuration LED
Bicolor LED (Red, Green)
USB Host1 LNK (link)
Green LED
Status
Flashing Red – Power exists; CPU FPGA not
loaded.
Green – Power exists; CPU is running from a
recognized power supply (one of the six
power supply options.)
Red – Failure on power-up. CPU is running
from an unrecognized power supply.
OFF – No new errors or warnings.
Green – New message logged.
Orange – New warning logged.
Red – New error logged.
Note: In systems with I/O expansion, the ERR
LED can indicate an error in either the main
or expansion frame.
Green – On startup
OFF – Successful power-up or restart.
Red – Power-up or restart failed.
OFF – No user application program in the
Flash memory.
Green – User application program is running.
Orange – User application program was
paused by user (during Hardware Test.)
OFF – Configuration was not loaded.
Green – Configuration was loaded.
Red – Configuration error.
ON – A USB device is connected.
OFF – No link exists between the CPU and
the MotoTrbo radio.
4-12
CPU Module