Table of Contents
Advertisement
6) Tighten all four screws with a screwdriver to secure the frame firmly against the wall.
7) Replace the removed modules in their slots.
Installing the ACE3600 in a 19" Rack
The following screw mount installation procedure should be used to install the ACE3600 8 I/O
(19") frame / 19" frame metal back in a 19" rack unit. The redundant CPU and power supply
frame on a 19" frame metal back can also be installed in a 19" rack unit.
Note: The brackets for 19" rack installation are not provided with the RTU and should be
ordered separately.
Procedure 2-2 How to Mount the RTU in a 19" Rack Unit
1) Using three M4 screws supplied with kit FHN7420A, attach the metal bracket (p/n
07013005001 from kit FHN7420A) to the side of the 19" frame metal back, according to
the desired depth of the unit on the rack. Repeat with the second bracket on the other side
of the 19" frame metal back. See Figure 2-4.
2) Screw one M5 screw (not supplied) into the upright of the 19" rack unit, to correspond to
the top keyhole on the metal bracket. Repeat on the opposite upright. See Figure 2-5.
Figure 2-4 Attaching Brackets to 19" Frame - Exploded View
2-4
Installation
Advertisement
Table of Contents
