Replacing A Power Supply Module - Motorola ACE3600 RTU Owner's Manual

Programmable remote terminal unit

Hide thumbs Also See for ACE3600 RTU:

Table of Contents

4. Remove any SRAM plug-in memory from the old CPU module and plug in to the new

5. Slide the new module all the way into the slot until the tabs click into place.

6. Reconnect the cables and press the cable holder back up into place.

Replacing a Power Supply Module

METAL PARTS OF THE POWER SUPPLY MAY BE VERY HOT.

After removing the power supply module, allow the metal parts to cool down before

servicing the unit.

Press Down on

Module Release Tab

Press Up on Module

Figure 29-1 ACE3600 Module Release Tabs

Break/Fix Procedures