Table of Contents
Advertisement
Radio
Adapter
Power
Connector
Radio
Antenna
Connector
Figure 21-35 CM/EM/GM Radio Cable Connections
4. Connect the communication cable (FKN8427A) to the back of the radio adapter
(FLN3636A) connector (10-pin RJ45 connector). (See Figure 21-35.) Place one Fair-Rite
soft ferrite (#7683477X01 from the supplied ferrite kit FHN7007A) on the cable near the
bottom of the CPU door, loop the cable one turn around it, and clamp the ferrite on the
cable. Connect the other end of the communication cable to the plug-in port of the
ACE3600 CPU.
5. Mount the CM/EM/GM radio onto the metal bracket (#0789422V45) using the two
supplied radio mounting screws from kit FHN6894A, # 0387839V89 on the top and
bottom of the radio. (See Figure 21-34, Figure 21-35 and Figure 21-36.)
6. Connect the antenna cable (FKN8429A
opening on the bottom of the ACE3600 housing using the four supplied screws. (See
Figure 21-35 and Figure 21-36.) Mount the complex (bracket and radio) on the RTU
chassis above the CPU and I/O modules, using the four built-in screws. (See Figure 21-36.)
*
In EMEA and Asia, add the adapter provided in kit FLN3635A to the radio before attaching the
antenna cable.
*
) to the antenna connector on the radio and to the
21-43
Radio Types and Installation Kits
Communication
Cable
(
)
FKN8427A
Power Cable
(
)
FKN8428A
Antenna Cable
*
(
)
FKN8429A
Advertisement
Table of Contents
