Table of Contents
Advertisement
Figure 21-66 RTU Site Configuration for MTM800 Radio – Port Type Parameters
4. Define desired links.
5. If you plan to synchronize the RTU time using an NTP server, use a DNS server, or use
third party protocols, specify these with the relevant information for your system.
6. Save the changes.
Advanced Parameter Configuration
The STS provides default settings for advanced port parameters for use with the MTM800.
These settings should be used.
Programming the MTM800 Radio using CPS
Before connecting a MTM800 radio to an ACE3600 RTU, the radio should be programmed as
necessary for packet data. For this purpose, use the CPS which can be ordered with the radio
or bring the radio to the Motorola Service Center.
21-83
Radio Types and Installation Kits
Advertisement
Table of Contents
