Table of Contents
Advertisement
Antenna Cable
(
)
FKN8429A
Power Cable
(
)
FKN8436A
Signal Cable
(
FKN8432A/
)
FKN8438A
Figure 21-2 XTL5000/XTL2500 Radio Cable Connections- Rear View
5.
Mount the bracket on the RTU chassis above the CPU and I/O modules, using the four
built-in screws. (See Figure 21-4.) The wider side of the bracket is attached to the
chassis.
6.
Connect the antenna cable (FKN8429A) to the Antenna connector on the radio. Run the
cable through the small white clips along the edge of the chassis and attach the connector
to the opening on the bottom of the ACE3600 RTU housing. (See Figure 21-2 and
Figure 21-4.)
Radio
Bracket
(
)
#0789422V41
Figure 21-3 XTL5000/XTL2500 Radio Bracket with Four Bracket Mounting Screws
Radio Antenna
Radio Power
Connector
Connector
21-7
Radio Types and Installation Kits
Radio Accessory
Connector
Bracket
Mounting
Screws
Advertisement
Table of Contents
