5) Hang the 19'' metal chassis on the brackets, so that the two teeth on the back of the metal
chassis hook onto the groove of the larger bracket. See Figure 2-8.
Figure 2-8 Installation of ACE3600 RTU 19" Rack- Exploded View
6) From the standard rack unit, remove the two modules from the leftmost slots and the two
modules from the rightmost slots. For the 19" accessories metal chassis, no accessories
need to be removed. (See Figure 2-9.)
7) Using two supplied M5 (X6) screws and a 16 cm (6.3") long screwdriver, from inside the
slot secure the 19" frame metal back to the small bracket. Repeat on the second side. See
Figure 2-8.
8) Replace any removed modules to their slots.
2-8
Installation