Table of Contents
Advertisement
Power
Cable
(
)
FKN8515A
Signal
Cable
(
)
FKN8431
Power Supply
Figure 21-32 GP/HT/PRO Radio Installed on ACE3600 Chassis
RTU Port Configuration for the GP320/GP328/HT750/PRO5150 Radio
To enable MDLC communication using GP320/GP328/HT750/PRO5150 radios, use the
ACE3600 STS site configuration utility to configure the ACE3600 RTU plug-in port
connected to the radio.
The following figures show the port configuration and advanced parameter configuration.
Although these show Port PI1, the same values can be applied to port PI2 as well, where
relevant.
Port Type
Procedure 21-22 How to Configure the ACE3600 Port for the GP/HT/PRO Radio
1.
In the ACE3600 STS click on the desired site, and open the site view.
2.
In the Port Tab, click on the plug-in port through which the RTU will communicate with
the radio.
3.
Confirm that the port parameters and data speed are as shown in the screen below.
CPU
Antenna Cable
N-Type Connector
21-40
Radio Types and Installation Kits
Radio
Radio
Bracket
(
FHN6899A
Antenna
Cable
(
FKN8434A
)
)
Advertisement
Table of Contents
