Table of Contents
Advertisement
Antenna Cable
(
FKN8429A
Power
CPU 3680
Supply
Figure 21-43 MotoTrbo Radio Installed on ACE3600 Chassis
RTU Port Configuration for the MotoTrbo Radio
The RTU port is configured using the ACE3600 STS as follows:
Port Type
Procedure 21-24 How to Configure the ACE3600 Port for the MotoTrbo Radio
1. In the ACE3600 STS, click on the desired site, and open the site view.
2. In the Port Tab, click on the USB port (HU1/HU2) through which the RTU will
communicate with the radio. (HU1 is the left USB port and HU2 is the right USB port.)
3. Confirm that the port parameters are as shown in the screen below.
Radio
)
Antenna Cable
N-Type Connector
21-51
Radio Types and Installation Kits
Radio Mounting
Screws (#
0387839V89)
and
Washers
Radio
Bracket
(
FHN6898A
Power Cable
(
FKN8436A
Communication
Cable (
FKN8644A
)
)
)
Advertisement
Table of Contents
