Table of Contents
Advertisement
Radio Accessory
Connector
Radio Power
Connector
Radio
4. Connect the communication cable (FKN8516A) to the end of the power and signal cable
using the attached screws (FKN8517A). (See Figure 21-64.) Place one Fair-Rite soft ferrite
(#7683477X01 from the supplied ferrite kit FHN7007A) on the cable near the bottom of
the CPU door, loop the cable one turn around it, and clamp the ferrite on the cable.
Connect the other end of the communication cable to the plug-in port of the ACE3600
CPU.
5. Mount the MTM800 radio onto the metal bracket (#0789422V45) using the two supplied
radio mounting screws from kit FHN6894A, # 0387839V89 on the top and bottom of the
radio. (See Figure 21-63, Figure 21-64 and Figure 21-65.)
6. Connect the antenna cable (FKN8430A/FKN8429A
the radio and to the opening on the bottom of the ACE3600 housing using the appropriate
bushing. (See Figure 21-65.) Mount the complex (bracket and radio) on the RTU chassis
above the CPU and I/O modules, using the four built-in screws. (See Figure 21-65.)
*
Antenna Cable provided may be either FKN8429A (with UHF connector plus antenna adapter
5871143Y01) or FKN8430A.
Figure 21-64 MTM800 Radio Cable Connections
*
) to the antenna adapter connector on
21-81
Radio Types and Installation Kits
Communication
Cable
Power Cable
FKN8517A
Antenna
Adapter
Connector
Advertisement
Table of Contents
