Mounting The Ace3600 Frame On A Wall - Motorola ACE3600 RTU Owner's Manual

not exceed 42.67m (140 feet).
If the ACE3600 is subject to high levels of shock or vibration, you must
take suitable measures to reduce the acceleration or amplitude. We
recommend that you install the ACE3600 on vibration-damping materials
(for example, rubber-metal anti-vibration mountings).
METAL PARTS OF THE POWER SUPPLY MAY BE VERY HOT.
After removing the power supply module, allow the metal parts to cool
down before servicing the unit.
A TORX screwdriver is required for installation.

Mounting the ACE3600 Frame on a Wall

Before drilling holes for mounting the frame, make sure there are no
electrical wires installed inside the wall at the holes' location.
Four holes are provided, one in each corner of the RTU frame, for wall mounting the RTU.
Figure 2-1, Figure 2-2, and Figure 2-3 show the dimensions of the various frames/metal chassis
and the distances between the holes. For convenient installation of the ACE3600 RTU on a
wall, allow an additional 6 cm (2.4") (in W, H) and 7 cm (2.75") (in D) around the plate.
365 mm
340 mm
Small Metal Chassis
Figure 2-1 Small//Medium/Large Metal Chassis Installation Dimensions and Screw Holes
335 mm
295 mm
Medium Metal Chassis
for Installation
2-2
Installation
448 mm
410 mm
Large Metal Chassis