Mounting The Ace3600 8 I/O Frame On A Wall (For Rtus Ordered Before October 2010) - Motorola ACE3600 RTU Owner's Manual

Mounting the ACE3600 8 I/O Frame on a Wall (for RTUs Ordered
before October 2010)
Procedure 2-5 How to Mount the RTU 19" Frame Metal Back on a Wall
The following installation procedure should be used to install the 8 I/O (19") frame on a wall,
using the special wall mount brackets provided with the RTU.
1) Remove the CPU, Power Supply and I/O modules from the RTU frame.
2) Drill four holes into the wall at the horizontal and vertical distances shown in Figure 2-13.
3) Using two supplied screws, secure the rectangular wall mounting bracket to the wall.
Repeat for the second bracket.
Figure 2-12 19" Frame Metal Back Installation
Figure 2-13 RTU Frame Metal Back Installation Dimensions
453 mm
450 mm
2-11
Installation