Table of Contents
Advertisement
LED Name
Description
PI1 CM
Plug-in Port 1 – CM (channel
monitor)
Green LED
SI1 TX
Serial Port 1 – TX (transmit)
Green LED
SI1 RX
Serial Port 1 – RX (receive)
Green LED
SI1 CM
Serial Port 1 – CM (channel
monitor)
Green LED
S2 TX
Serial Port 2 – TX (transmit)
Green LED
S2 RX
Serial Port 2 – RX (receive)
Green LED
S2 CM
Serial Port 2 – CM (channel
monitor)
Green LED
E1 LNK
Ethernet Port 1 (link)
Green LED
E1 RX
Ethernet Port 1 – RX
(receive)
Green LED
PI2 TX
Plug-in Port 2 – TX
(transmit)
Green LED
PI2 RX
Plug-in Port 2 – RX (receive)
Green LED
PI2 CM
Plug-in Port 2 – CM (channel
monitor)
Green LED
D1 RX
USB Device Port – RX
(receive)
Status
ON – Channel Busy (if port is in use by radio,
RS485, or RS232)
– Network Connected (if an IP plug-in is
used)
ON – Transmitting Data
ON – Receiving Data
ON – Channel Monitor is ON.
ON – Transmitting Data
ON – Receiving Data
ON – Channel Monitor is ON
ON – Network Connected
In case of RAM test and startup failure, see
Table 20-2 and Table 20-3.
ON – Receiving Data
In case of RAM test and startup failure, see
Table 20-2 and Table 20-3.
ON – Transmitting Data
ON – Receiving Data
ON – Channel Busy (if port is in use by radio,
RS485, or RS232)
– Network Connected (if an IP plug-in is
used)
ON – Receiving Data
20-11
ACE IP Gateway Module
Advertisement
Table of Contents
