Table of Contents
Advertisement
MTM800 Radio Installation Kit
The MTM800 Installation Kit for ACE3600 (FLN4109A) enables the user to install the
MTM800 mobile radio in ACE3600 Remote Terminal Units (RTU). Each kit includes a
bracket, adapter, and cables.
Installation
The MTM800 can be mounted on the ACE3600 RTU as follows:
Procedure 21-34 How to Install the MTM800 Radio on the Metal Chassis
1. If you choose to attach the MTM800 radio to a plug-in port, attach the radio plug-in port
from the installation kit (FLN4109A) to the desired opening on the ACE3600 CPU
module. For instructions on attaching plug-in ports, see Connecting Plug-In Ports to the
CPU Module in the CPU Module chapter above.
2. Connect the 20-pin connector radio signal and power cable (FKN8517A) to the accessory
connector on the radio. (See Figure 21-63 and Figure 21-64.)
Mounting Screws
(
0387839V89
3. Connect the end of the power cable (FKN8517A) to the radio's power connector. (See
Figure 21-63 and Figure 21-64.) Connect the other end of the power cable to the AUX1A
or AUX1B connector on the ACE3600 RTU Power Supply unit. (See Figure 21-65.)
)
Figure 21-63 MTM800 Radio and Metal Bracket
21-80
Radio Types and Installation Kits
Radio Accessory
Connector
Power
Connector
Radio
Bracket
(
)
FHN6894A
Advertisement
Table of Contents
