Motorola ACE3600 RTU Owner's Manual page 301

iNET 900 Radio Installation Kit
The iNET™ 900 installation kit (V680AH/FLN3854A) enables the user to install MDS iNET
900 (board version) radio modems in ACE3600 Remote Terminal Units (RTU). Each kit
includes a bracket, adapter, and cables.
Installation
The iNET 900 radio modem is housed in a plastic housing, as shown below:
The iNET 900 can be mounted on the ACE3600 RTU as follows:
Procedure 21-30 How to Install the iNET 900 Radio on the Metal Chassis
1. Attach the iNET 900 radio modem to the metal bracket (#0789971V39 from FHN7067A)
using the four supplied screws, inserting the screws from below. (See Figure 21-52 below.)
Note: The radio must be placed in the bracket with the connectors to the left side, so that
the bracket can be mounted on the RTU chassis and the cables can reach the CPU.
Figure 21-52 iNET 900 Radio Modem Mounted on Metal Bracket – Front and Rear View
2. Mount the bracket on the RTU chassis above the I/O modules, using the four built-in
screws. (See Figure 21-53 below.)
Figure 21-51 iNET 900 Radio Modem
21-60
Radio Types and Installation Kits