Hitachi TM3030 Plus Instruction Manual page 44

Tabletop microscope
Table of Contents

Advertisement

WARNING: The system is a heavy object weighing approximately 65 kg (For Manual
Stage) / 68 kg (For Motor drive Stage). Install the system on a table with
a minimum load bearing capacity of 100 kg. Installing it on a table with
an inadequate load bearing capacity can cause the table to break, which
can result in unexpected injury beyond damage to the system.
To avoid injury from the falling or toppling of the system, do not install the
system in an unstable place or a place liable to fall or toppling due to an
earthquake or other events.
Install the system as it has a space of not less than 200 mm on the left
side so that the center of the gravity of the system is positioned near the
center of the table.
Do not install the device when delivering and do not transfer the device
after installation. Our engineer must carry it out.
WARNING: As a rule, do not move the diaphragm pump because it is a heavy load
of 4.5 kg. When moving it by necessity, move it carefully after
considering the length of piping and cable, the safety to one's foot, and
impact to the pump.
1 - 7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents